- Home
- Fun Autopart
- Automotive Maintenance: Steps ...
They say that having a car is like having another family member in terms of expenses. Maintaining a vehicle can be costly, and sometimes it feels like you can’t get out of this relationship without breaking the bank.
To help you stay on good terms with your car and save some money in the long run, it’s important you learn how to perform at least some of the most basic maintenance tasks yourself, such as changing the oil and replacing a tyre. Presumably, you can’t imagine what happens if you don’t change your oil properly.
Also, to do so, you’ll need a couple of tools, including a jack and a lug nut wrench. You can find these parts in your local or online autopart store.
Changing Your Own Tyre With Ease
Now DriveRevolve will reveal how to change a car tyre in under 10 minutes!
Step 1: Park your vehicle on a flat surface, away from any objects or other vehicles that could potentially cause harm if hit. Turn off the engine, remove the key from the ignition and take out the battery (if possible).
Step 2: While standing near the front of the car, locate the wheel you plan on replacing. Remove the hub cap by pulling it straight off. If there is no hub cap, use a screwdriver to loosen the lug nuts. Be careful not to drop them or let them fall onto the ground below as they can easily become lost or damaged.
Step 3: Using a jack stand and/or hydraulic lift if available, place it under the frame of the car near the front right wheel. Lower the jack until it touches the bottom of the vehicle. Place the lug nut wrench over one of the studs on the wheel and tighten it until the wheel is securely fastened.
Step 4: Remove the lug nuts with a quick jerking motion and pull them off of the wheel. Set them aside in an area where they won’t get lost or damaged.
Step 5: Lift up the car using the jack stand and/or hydraulic lift if available, and remove the wheel from its place on the axle. Note that you should not leave your hands under the vehicle for more than a few seconds at a time.
Step 6: Install the new tyre, making sure that it is positioned in the same spot as the old one. Tighten the lug nuts by hand until they are secure but not too tight. Repeat this process for each wheel on your vehicle.
Step 7: Lower the car back onto its wheels and tighten the hub caps using a screwdriver if needed. Put everything back together and start driving!
Changing your car’s oil on time is also important in terms of maintenance. It’s not only good for the car but also for its engine, as it helps prevent rust from developing in critical areas and prolongs its life expectancy.
Quick Steps to Changing Oil
Not just how long does it take to get an oil change captures your attention, sticking to ways to change your oil is also vital. Follow these steps to change your vehicle’s oil:
Step 1: Park your car on a level surface and turn off the engine. Open up the hood and locate the filter that needs replacing. Remove any old filters or debris with a cloth. Make sure you have an appropriate container ready to store the used oil in.
Step 2: Locate the drain plug at the bottom of the engine and remove it using a socket wrench. You should see where the used oil has accumulated; this is where you will pour the new one.
Step 3: Place your container under the car’s engine, then slowly tilt it back until all of the old oil has drained out. Be sure to do this over some sort of ground cover like newspapers or cardboard as the old oil can leak onto the ground.
Step 4: Remove the filter from its place and dispose of it properly, then replace it with a new one. Add about 3-4 litres of fresh engine oil into the car’s engine. Make sure to check your vehicle’s manual for details on how much exactly you need to add.
Step 5: Start up your car and let it run for about 5 minutes or until the oil light turns off. Shut off the engine and drain out any excess oil that may have remained in the engine. Clean up your tools and store them away for future use.
Also, never look down on the car leaking oil when parked to avoid further consequences.
Why Shop For Replacement Parts Online?
There are many other tasks that can be performed to maintain your vehicle such as cleaning the engine compartment or replacing worn-out parts, but these basic steps should help you keep your car healthy for a long time. Just remember: regular maintenance will help you save money in the long run!
It’s important to buy replacement parts and tools from a reputable dealer in order to guarantee their quality and durability. And if you need more information about how to maintain your vehicle, check out the owner’s manual! Most people prefer buying from an online autopart store because they can find better deals and more suitable parts.
Online autopart stores offer a wider selection of parts than brick-and-mortar stores, so customers can more easily find the right part for their needs. Online stores also typically offer lower prices than brick-and-mortar stores, so customers can save money on their purchases.
Last but not least, you’ll have the tools or parts delivered right to your doorstep, so there’s no need for you to leave the house or go out of town in order to buy them. In conclusion, learning how to perform basic maintenance tasks yourself can help you save money in the long run, and it can also help you get more enjoyment out of owning a car.
Head for more far-out reads in our Fun Autopart corner!
Click to rate this post!
[Total: 1 Average: 5]